What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
Were you trying to find related information on What Would Cause My Electric Water Heater to Stop Working??
Numerous contemporary houses take advantage of an electrical water heater for their heating unit, due to its benefit as well as simplicity of use. Nonetheless, similar to any other electric devices, problems might emerge with its usage, unexpectedly. It can be really aggravating to wake up to a cold shower instead of a hot one or having your bath with water that isn't hot enough or even too hot. Whatever the situation may be, water heater issues can be rather stressful. Luckily, we've made a list of possible solutions to your water heater issues. There are a variety of variables that can create most of these issues, maybe a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you switch off the major power supply for security. Whatever the issue is, getting it fixed need to not posture way too much of a concern if you adhere to these actions:
Examine Your Power Supply:
As standard as this might appear, it is extremely needed. Without sufficient power, your water heater will not function. So the first thing to do when your water instantly retires is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the concern, merely transform it on and off once more. Change any kind of busted or damaged fuse. Examine the device with power after these changes to see if it's currently functioning.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, then attempt looking into your burner if it is still functioning. Check each of your burner to make sure the issue isn't with any of them. If any of them is faulty, change that component and after that check whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm sufficient, you may require to check the temperature level settings on your upper thermostat. Make sure the circuit breaker is switched off before doing anything. Open the accessibility panel and also press the red button for temperature reset over the thermostat. This should assist warm the water. Turn the circuit breaker back on as well as examine if the problem has been solved.
Call A Professional:
If after replacing all malfunctioning parts and also resetting your temperature level, the water heater still isn't working, you might require to contact a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold faucets have actually been switched or it may be undersized for the quantity of warm water needed in your home. Whatever the instance may be, a professional plumber would certainly aid resolve the issue.
Verdict
Water heater issues are not constantly significant. A lot of them are due to small concerns like a blown fuse or damaged heating element. Replacing the malfunctioning components should work. Nevertheless, if you are still incapable to solve the problem, give a call to your closest plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I have been very inquisitive about Hot Water Heater Repair and I'm hoping you appreciated the new article. Kindly take the opportunity to promote this page if you enjoyed it. Thanks a bunch for your time. Come back soon.
Schedule A Free Estimate
Report this page